User's Manual
34
Chapter 11: User/Guest DetailsUniFi
™
AP-Mini User Guide
Ubiquiti Networks, Inc.
Chapter 11: User/Guest Details
The User and Guest hyperlinks bring up the User/Guest
Details window. There are four clickable tabs at the top of
the window and two buttons located on the bottom of the
window. The buttons are accessible from any of the tabs
and perform the following actions:
Block The block button allows you to block the selected
user from accessing the network.
Reconnect Allows you to reconnect a user that has been
blocked previously.
The four tabs contain the following information:
Details
Overview
MAC address Displays the MAC address of the Access
Point.
Hostname Displays the name (if defined).
IP address Displays the IP address of the Access Point.
Uptime Displays the amount of time the Access Point has
been running without interruption.
Connected AP Displays the name or MAC address of the
Access Point this user is connected to.
Statistics
ESSID Displays the wireless network name (SSID) of the
network that the user is connected to.
Connected AP Displays the MAC address or name of the
Access Point the user is connected to.
Channel Displays the channel being used for wireless
communication.
Signal Displays the signal level.
TX Rate Displays the transmit rate.
RX Rate Displays the reception rate.
Activity Displays user activity.
Power Save Indicates whether power saving is enabled.
Received Pkts / Bytes Displays the number of packets
and total bytes received by the user.
Sent Pkts / Bytes Displays the number of packets and
total bytes transmitted by the user.
Note: The Statistics tab will only appear when
the User/Guest is connected.