User's Manual

32
Chapter 10: Access Point DetailsUniFi
™
AP-Mini User Guide
Ubiquiti Networks, Inc.
Access Point - Isolated
When an Access Point is in an Isolated state, a connection
to the UniFi Controller software can be reestablished
by reconnecting the Access Point to the router or by
establishing a wireless uplink to a wired Access Point. See
“Wireless Uplinks” on page 31 to find, select, and
connect to a wireless Access Point.
Note: When in an Isolated state, the Access Point
icon will change to red/orange on the Map tab.
The LED on the actual device will be steady green
with occasional flashing. This Access Point doesn’t
provide any wireless service.
Note: Do not use the Forget this AP option when
the Access Point is in an Isolated state. If you do,
the only way to make the Access Point accessible
from the UniFi Controller is to take it down and
connect by wire.
Access Point - Managed by Other
When an Access Point is in Managed by Other state, this
indicates that the Access Point is not in the default state
but it is not controlled by the UniFi Controller.
Overview
MAC address Displays the MAC address of the Access
Point.
Model Displays the model information.
Version Displays the version of software used on the
Access Point.
Last Seen Displays the amount of time that has passed
since the Access Point was last seen.