User's Manual

ManualsBrandsUbiquiti Networks ManualsElectronics802.11 b/g/n 1x2 MIMO NETWORKING DEVICE

Chapter 6: Access Points TabUniFi

™

AP-Mini User Guide

Ubiquiti Networks, Inc.

Chapter 6: Access Points Tab

The Access Points tab displays a list of managed Access

Points, each displaying its name, IP address, status,

number of clients connected, download/upload statistics,

and transmit/receive channel.

Search Allows you to enter text you want to search for.

Simply begin typing; there is no need to press Enter.

Page Size Allows you to determine how many results are

displayed per page. Select 10, 20, 30, 40, 60, or 100.

Name/MAC Address Displays the hostname, alias, or

MAC address of the Access Point. You can click the name

to get additional details on the Access Point.

IP Address Displays the IP address of the Access Point.

Status Displays the connection status information.

• Connected Displays that the Access Point connection is

physically wired.

• Connected (wireless) Displays that the Access Point

connection is wirelessly downlinked to a physically

wired Access Point.

• Disconnected Displays if the Access Point is

unreachable by the UniFi Controller software.

Disconnected Access Points will also appear under

Access Points > Disconnected at the top of the interface.

•

Isolated A managed Access Point that is unable to

locate its uplink.

Num Clients Displays the number of clients connected to

the Access Point.

Download Displays the total size of downloads via the

Access Point.

Upload Displays the total size of uploads via the Access

Point.

Channel Displays the transmit/receive channel being

used by the Access Point.

Actions Select an action button to perform the desired

action:

• Restart Restart the selected Access Point.

• Locate Click to locate the Access Point on the map. The

button will flash green and black until the Locate button

is clicked again. The LED on the Access Point will flash

so that you can place it in the correct location on the

map. The LED will flash until the Locate button is clicked

again.

• Adopt Click to adopt an Access Point that appears

under Access Points > Pending at the top of the interface.

The Status will appear as Adopting until the Access Point

is connected.

• Upgrade If a software upgrade is available for the

Access Point, click Upgrade to install the latest UniFi

firmware on the device. The Status will appear as

Upgrading until the process is complete and the Access

Points reconnects to the UniFi Controller software.

Summary of content (27 pages)

PAGE 1
UniFi™ AP-Mini User Guide Chapter 6: Access Points Tab Chapter 6: Access Points Tab • Isolated A managed Access Point that is unable to locate its uplink. The Access Points tab displays a list of managed Access Points, each displaying its name, IP address, status, number of clients connected, download/upload statistics, and transmit/receive channel. Num Clients Displays the number of clients connected to the Access Point. Download Displays the total size of downloads via the Access Point.
PAGE 2
UniFi™ AP-Mini User Guide Chapter 7: Users Tab Chapter 7: Users Tab Down Displays the total bytes of data received by the user. The Users tab displays a list of users that are connected to the primary wireless network of the Access Point. Up Displays the total bytes of data sent by the user. Activity Displays the level of activity for each user. Bars Activity Level (Bytes per second) Idle 500 8000 64000 512000 2048000 Search Allows you to enter text you want to search for.
PAGE 3
UniFi™ AP-Mini User Guide Chapter 8: Guests Tab The Guests tab displays a list of users that have connected to the guest network of the Access Point. Chapter 8: Guests Tab Signal Displays the signal strength and type (b/g/n) from the Access Point to the client. If a lightning bolt symbol is present, the device is in power save mode. The device will return to active mode when Down or Up activity resumes. Down Displays the total bytes of data received by the guest.
PAGE 4
UniFi™ AP-Mini User Guide Chapter 9: Offline Clients Tab The Offline Clients tab displays a list of users that have connected to the guest or primary network of the Access Point at some time during the period specified. Chapter 9: Offline Clients Tab Up Displays the total bytes of data sent by the user. Actions Click an action button to perform the appropriate action. • Block Click this button to block a specific user from accessing the Access Point.
PAGE 5
UniFi™ AP-Mini User Guide Chapter 10: Access Point Details UniFi Access Points connect to the UniFi Controller software either by Ethernet, denoted as Connected, or by a wireless connection, denoted as Connected (wireless). Based on connection type, options under each tab vary.
PAGE 6
UniFi™ AP-Mini User Guide Chapter 10: Access Point Details Downlinks Channel Displays the wireless channel being used. Displays which wireless Access Points are currently connected to the wired Access Point. Includes details such as the downlink Access Point (by specified name or MAC address), signal strength, and the option to remove the wireless Access Point from the wired Access Point by clicking remove. Transmit Power Displays the EIRP in dBm.
PAGE 7
UniFi™ AP-Mini User Guide Guests Chapter 10: Access Point Details Configuration Allows you to change device configuration settings. Click the Apply button to commit any changes. Config Name Displays the name (MAC address if not defined) of users connected to the guest network of the selected Access Point. You can click the links under Name to display additional details of each user (see “User/Guest Details” on page 34 for more information).
PAGE 8
UniFi™ AP-Mini User Guide Chapter 10: Access Point Details Compatibility Selects the wireless compatibility mode. By default this is set to auto. Choose one of the following: • Auto Supports wireless b/g/n standards. • 11n/11g only Only supports wireless-n and wireless-g devices. • 11n only Only supports wireless-n devices. • 11g only Only supports wireless-g devices. WLANs Allows the deployment of different WLANs on different Access Points.
PAGE 9
UniFi™ AP-Mini User Guide Chapter 10: Access Point Details Network The Access Point can be configured to obtain an IP address automatically or configured with a static IP address. Network Settings Configure IP Select between Using DHCP or Static IP: • Using DHCP Choose this option to obtain the IP address, Gateway, and DNS address dynamically from the external DHCP server.
PAGE 10
UniFi™ AP-Mini User Guide Chapter 10: Access Point Details Wireless Uplinks Access Point - Heartbeat Missed When an Access Point is not connected by a wire, Wireless Uplinks lists potential uplink Access Points that can be selected to establish a wireless connection. When a wired Access Point is disconnected from the router, its state will initially change to Heartbeat Missed, followed by Isolated. AP Displays the specified name (or MAC address) of the potential Uplink Access Point.
PAGE 11
UniFi™ AP-Mini User Guide Chapter 10: Access Point Details Access Point - Isolated Access Point - Managed by Other When an Access Point is in an Isolated state, a connection to the UniFi Controller software can be reestablished by reconnecting the Access Point to the router or by establishing a wireless uplink to a wired Access Point. See “Wireless Uplinks” on page 31 to find, select, and connect to a wireless Access Point.
PAGE 12
UniFi™ AP-Mini User Guide Advanced Adoption Chapter 10: Access Point Details Forget this AP Forget Click to remove the Access Point from management by the UniFi Controller software and to restore it to factory default settings. IP The IP address and SSH port of the Access Point are populated here. Username Enter the SSH Username for management access. Password Enter the SSH Password for management access.
PAGE 13
UniFi™ AP-Mini User Guide Chapter 11: User/Guest Details Chapter 11: User/Guest Details Statistics The User and Guest hyperlinks bring up the User/Guest Details window. There are four clickable tabs at the top of the window and two buttons located on the bottom of the window. The buttons are accessible from any of the tabs and perform the following actions: Block The block button allows you to block the selected user from accessing the network.
PAGE 14
UniFi™ AP-Mini User Guide History Date/Time Displays the date and time the user connected to the Access Point. Chapter 11: User/Guest Details Debug Debug Allows you to force a device to connect to a specific Access Point. Duration Displays the time duration that the user was connected to the Access Point. Down Displays how many bytes were downloaded by the user during the session. Up Displays how many bytes were uploaded by the user during the session.
PAGE 15
UniFi™ AP-Mini User Guide Chapter 12: Hotspot Manager Hotspot Manager includes four main tabs when accessed by the UniFi Controller admin account. These tabs include Wireless Guests, Payments/Transactions, Vouchers, and Operator Accounts. Operator accounts that are created by the admin will have access to three tabs when they log in. These tabs include Wireless Guests, Payments/Transactions, and Vouchers. Wireless Guests Lists the Hotspot’s currently active wireless guests.
PAGE 16
UniFi™ AP-Mini User Guide Chapter 12: Hotspot Manager Vouchers Operator Accounts Allows the creation of vouchers including a distributable code, duration values, and use restrictions. Allows the creation of Operator Accounts that can log in to Hotspot Manager to manage wireless guests, payments/ transactions, and vouchers. Search Enter keywords in the Search box to find a specific voucher based on Code, Create Time, or Note values.
PAGE 17
UniFi™ AP-Mini User Guide Appendix A: Portal Customization Overview With Portal Customization, the UniFi Controller software allows complete branding of a portal implementation, allowing you to “white label” your wireless internet service as if you had developed it yourself. In order to provide the maximum flexibility in your branding effort, the UniFi Controller software provides total access to the portal directory on the system in which it is installed.
PAGE 18
UniFi™ AP-Mini User Guide Mac Appendix A: Portal Customization 6. Double-click the portal folder to open it. 1. Navigate to Go > Applications. 2. Control-click the UniFi application and select Show Package Contents. Windows The Windows files are located in the following location: :\Users\\Ubiquiti UniFi\ data\portal Customizable Default Files The following default customizable html and css files can be found in the portal folder: • index.html The main landing page. 3.
PAGE 19
UniFi™ AP-Mini User Guide Appendix B: UniFi Discovery Utility Overview The Ubiquiti UniFi Discovery Utility includes tools that allow the discovery and management of UniFi Enterprise WiFi System Access Points. It is installed automatically as part of the UniFi Controller software installation process. See “Software Installation” on page 5 for more information.
PAGE 20
UniFi™ AP-Mini User Guide Manage Click to set the inform URL, allowing the Access Point to be managed by an instance of the UniFi Controller software running in a NOC or in the cloud (see “Network Topology Requirements” on page 1 for a visual representation of this configuration). The following window appears: Appendix B: UniFi Discovery Utility Reboot Click to reboot Access Point.
PAGE 21
UniFi™ AP-Mini User Guide Appendix C: Specifications Appendix C: Specifications UniFi AP-Mini (UAP-Mini) Specifications Dimensions 13.5 x 13.5 x 2.6 cm Weight 113 g (134 g with mounting kits) Ports Ethernet (Auto MDX, autosensing 10/100 Mbps) Buttons Reset Antennas 1 Integrated Wi-Fi Standards 802.11 b/g/n* Power Method Passive Power over Ethernet (12-24V) Power Supply 5V 2A PoE Adapter included Max. Power Consumption 3W Max.
PAGE 22
UniFi™ AP-Mini User Guide Appendix D: Safety Notices Appendix D: Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
PAGE 23
UniFi™ AP-Mini User Guide Appendix E: Warranty General Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) represents and warrants that the Products furnished hereunder shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
PAGE 24
UniFi™ AP-Mini User Guide Appendix F: Compliance Information Appendix F: Compliance Information This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: Installer Compliance Responsibility 2. this device must accept any interference, including interference that may cause undesired operation of the device.
PAGE 25
UniFi™ AP-Mini User Guide Appendix F: Compliance Information NB-Identification number (if there is any) Español Notified body number is indicated if it is involved in the La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
PAGE 26
UniFi™ AP-Mini User Guide Appendix G: Declaration of Conformity Česky [Czech] Dansk [Danish] Nederlands [Dutch] UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES. Undertegnede UBIQUITI NETWORKS erklærer herved, at følgende udstyr UBIQUITI NETWORKS device, overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
PAGE 27
UniFi™ AP-Mini User Guide Appendix H: Contact Information Appendix H: Contact Information Ubiquiti Networks Support Ubiquiti Support Engineers are located in the U.S. and Europe and are dedicated to helping customers resolve software, hardware compatibility, or field issues as quickly as possible. We strive to respond to support inquiries within a 24 hour period. Email: support@ubnt.com Phone: 408-942-1153 (9 a.m. - 5 p.m. PST) Online Resources Wiki Page: www.ubnt.com/wiki Support Forum: www.ubnt.