User's Manual

Introduction
Thank you for purchasing the Ubiquiti Networks®
UniFi®802.11ac Wave 2 Access Point with Dedicated Security
Radio. This Quick Start Guide is designed to guide you through
installation and includes warranty terms.
IMPORTANT: The UAP-AC-SHD requires the UniFi
Controller v5.4 or higher, available at:
www.ubnt.com/download/unifi
Package Contents
UniFi AP AC SHD Mounting
Plate
Ceiling Backing
Plate
Ceiling Screws
(Qty. 4)
Keps Nuts
(Qty. 4)
T-Bar Mounts
(Qty. 2)
T-Bar Screws
(Qty. 2)
Allen Wrench
802.11AC Wave 2 Access Point
with Dedicated Security Radio
Model: UAP-AC-SHD
Wall Screw
(Qty. 4)
Screw Anchors
(Qty. 4)
Release Tool Cable Feed
Plug
Quick Start
Guide
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
is
designed for outdoor installations. It is the professional installer’s responsibility to follow local
country regulations, including operation within legal frequency channels, output power, and
Dynamic Frequency Selection (DFS) requirements.