User's Guide

12Ubiquiti Networks, Inc.
Chapter 3: Using the UniFi Controller Software UniFi Enterprise WiFi System User Guide
Radio (11n/b/g)
Click Radio to display the channel and transmit/receive
statistics.
• Channel Displays the wireless channel being used.
• Transmit Power Displays the transmit power.
•
TX Pkts / Bytes Displays the number of packets and
total bytes transmitted by the Access Point.
• RX Pkts / Bytes Displays the number of packets and
total bytes received by the Access Point.
• TX Retry / Dropped Displays the percentage of
transmitted packets that needed to be resent and the
percentage of packets that were dropped.
•
RX Error / Dropped Displays the percentage of packets
received that needed to be resent and the percentage of
packets that were dropped.
• # Users Displays the number of users connected to the
primary network.
•
# Guests Displays the number of users connected to
the guest network.
Users
Name Displays the name (MAC address if not defined)
of users connected to the primary network of the
selected Access Point. You can click on the name to
display additional details of each user (see User/Guest
on the following page) or click a button to perform the
appropriate action.
WLAN Displays the SSID (network name) of the wireless
network the user is connected to.
Actions Select from one of the following actions:
•
Block Click this to block a specific user from accessing
the Access Point. This will add the client to the Blocked
Device list.
• Reconnect Click this button to reconnect a specific user
to the Access Point.