User's Guide

11Ubiquiti Networks, Inc.
Chapter 3: Using the UniFi Controller Software UniFi Enterprise WiFi System User Guide
Activity Displays the level of activity for each guest.
Bars
Activity Level
(Bytes per second)
Idle
500
8000
64000
512000
2048000
Uptime Displays the total time the user has been
connected for this session.
Actions Click an action button to perform the
appropriate action.
• Block Click this to block a specific guest from accessing
the Access Point.
• Reconnect Click this button to reconnect a specific
guest to the Access Point.
Recent Events
Displays a list of recent events including the date and time
the event occurred and the details of the event. The user
and AP names are clickable links.
Event Slider Move the slider right and left to navigate
between pages of events.
Search Allows you to enter text you want to search for.
Simply begin typing, there is no need to press enter.
Clicking on an Event Device Link
The event messages have clickable links [in brackets
underlined in gray text] for access points and users/
guests. Details vary based on the selection.
AP
The upper part of the window has 4 clickable tabs. The
bottom of the window has a Locate and Restart button.
Use the Locate button to flash the LED on the Access
Point and flash the Access Point icon on the map. Use
the Restart button to restart the Access Point. The 4 tabs
contain the following information:
Details
Displays details on the Access Point. Click Radio to display
the channel and transmit/receive statistics.
Overview
• MAC address Displays the MAC address of the Access
Point.
• Model Displays the model information.
• Version Displays the version of software used on the
Access Point.
• IP address Displays the IP address of the Access Point.
• Uptime Displays the amount of time the Access Point
has been running without interruption.
• # Users Displays the number of users connected to the
primary network.
•
# Guests Displays the number of users connected to
the guest network.