User's Guide

8Ubiquiti Networks, Inc.
Chapter 3: Using the UniFi Controller Software UniFi Enterprise WiFi System User Guide
4. Click Close.
5. You can adjust the zoom using the slider on the right.
Drag the Access Point icon(s) from the Unplaced APs
list on the left to the appropriate location(s) on the map.
The access point will appear in the area that you placed it.
Access Point Shows the location of the Access
Point on the map.
Click and hold this icon to drag the Access Point
to another location on the map.
Click on the Access Point icon to reveal
additional options. Click a blank area of the map
to hide the additional options.
Lock Locks the selected Access Point in the
current location on the map.
Details Brings up the Details window. This
allows you to view Access Point settings and
connected users. You can also edit the radio
channel, transmit power, and device alias.
There are 4 tabs to select from in the
Details window. Details, Users, Guests, and
Configuration.
•
Details Displays details on the Access Point
including the MAC address, model, version,
IP address, uptime, connected users, and
connected guests. Click Radio to display the
channel used, transmit power, and packet
information.
•
Users Displays the hostname of the users
that are connected to the selected Access
Point and the IP address assigned to them.
You can click on the hostname to display
additional details of each user. A window
with Details, Statistics, and Configuration is
displayed. The Details tab displays the MAC
address, hostname, IP address, uptime and
the AP they are connected to. The Statistics
tab displays the channel used, signal strength,
transmit and receive rates, power saving
enabled or disabled, and the number of
packets sent and received. You can also click
History to see a sortable list of events. The
Configuration tab allows you to change the
alias name for the device.
• Guests Displays the MAC address of guests
that are connected to the guest network.
•
Configuration Allows you to change the
alias name of the device, the channel setting,
and set the transmit power to Auto, High,
Medium, or Low. You can also remove the AP
if you no longer want to manage it with the
UniFi software.
Remove Remove the Access Point from the
location on the map.