Quick Start Guide

ManualsBrandsUbiquiti Networks ManualsComputersUniFi FlexHD Access Point

1

2

3

4

5

6

7

8

9

Table Of Contents

Wall

If the Ethernet cable is coming from the inside of a wall:

1. Bend and remove the plastic tab that covers the cable feed.

2. Use the Wall Mount as a template to mark the holes on the

wall where the UAP FlexHD will be installed.

3. Pre-drill the holes in the wall and pull the Ethernet cable

forward, sliding it through the opening in the Wall Mount.

Then use the Screws and Screw Anchors to secure the Wall

Mount to the wall.