User Manual

Introduction
Thank you for purchasing the Ubiquiti Networks®
UniFi®802.11ac Wave 2 Access Point with Dedicated Security
Radio. This Quick Start Guide is designed to guide you through
installation and includes warranty terms.
IMPORTANT: The UAP-AC-SHD requires the UniFi
Controller v5.4 or higher, available at:
www.ubnt.com/download/unifi
Package Contents
UniFi AP AC SHD Mounting
Plate
Ceiling Backing
Plate
Ceiling Screws
(Qty. 4)
Keps
Nuts
(Qty. 4)
T-Bar
Mounts
(Qty. 2)
T-Bar
Screws
(Qty. 2)
Allen
Wrench
Wall
Screws
(Qty. 4)
Screw
Anchors
(Qty. 4)
Release Tool Cable Feed Plug Gigabit PoE*
(48V, 0.5A) with
Mount Bracket
Power Cord*
* Included only in the single-pack of the UAP-AC-SHD
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
™
is
designed for outdoor installations. It is the professional installer’s responsibility to follow local
country regulations, including operation within legal frequency channels, output power, and
Dynamic Frequency Selection (DFS) requirements.