Quick Start Guide

Introduction
Thank you for purchasing the Ubiquiti Networks®
UniFi®802.11ac Dual-Radio Pro Access Point. This Quick Start
Guide is designed to guide you through installation and
includes warranty terms.
IMPORTANT: The UAP-AC-PRO requires the UniFi
Controller v5.4 or higher, available at:
www.ubnt.com/download/unifi
Package Contents
UniFi AP AC Pro Mounting Bracket Ceiling Backing Plate
Flat Head Screws
(Qty. 4)
Keps Nuts
(Qty. 4)
Screws
(Qty. 4)
Screw Anchors
(Qty. 4)
Cable Feed Plug Gigabit PoE* (48V, 0.5A)
with Mount Bracket
Power Cord*
* Included only in the single-pack of the UAP-AC-PRO
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
™
is
designed for outdoor installations. It is the professional installer’s responsibility to follow local
country regulations, including operation within legal frequency channels, output power, and
Dynamic Frequency Selection (DFS) requirements.