Owners manual

3
Chapter 1: Software InstallationUniFi® Controller User Guide
Ubiquiti Networks, Inc.
4. The UniFi Setup Wizard will create a secure primary
wireless network for your devices. Perform the
following steps:
a. Enter the wireless network name (SSID) in the Secure
SSID field.
b. Enter a passphrase to be used for your primary
network in the Security Key field.
c. To enable guest access, select Enable Guest Access,
and enter a guest network name in the Guest
SSIDfield.
d. Click Next.
5. Enter an admin name in the Admin Name field and
password in the Password field to use when accessing
the management interface. Confirm your password in
the Confirm Password field. Click Next.
6. Review your settings. Click Finish to save your settings
or click Back to make changes. Once the wizard
is finished, the browser will be redirected to the
management interface.
Congratulations, your wireless network is now configured.
A login screen will appear for the UniFi Controller
management interface. Enter the admin name and
password that you created and click Login.
Proceed to the next chapter for information on using the
UniFi Controller software.