Owners manual

79
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 14: Client Details
Chapter 14: Client Details
A client hyperlink opens the client’s Details window either
in the Properties tab or as a separate popup window.
You can always dock this window in the Properties tab or
detach it as a separate window.
The top of the window displays the device icon and name
(or MAC address).
Properties
The Properties tab is hidden by default. To display it, click
the properties icon. The Properties tab appears on the
right side of the Devices screen.
Information about each selected client appears as a
popup within this tab. The information varies depending
on whether the client is wired or wireless:
• Wireless Client – Details
• “Wired Client – Details” on page 81
Close Click to close the Properties tab and client
popups.
Minimize Click to display the clients as drop-down
rows.
Each row displays the following:
• (icon) Displays the icon of the device (the icon may vary
depending on the device type).
• Name/MAC Address Displays the hostname, alias, or
MAC address of the device.
• Display Click to display the device information.
• Detach Click to display the same information in a
separate popup screen that can be moved anywhere
within the browser screen.
• Close Click to close the device popup.
Hide Click to hide the Properties tab but allow the
device popups to remain accessible from this tab.
There are four clickable tabs:
• Details
• Statistics
• History
• Configuration
The bottom of the window has three buttons:
• Block Click to block this client from accessing
the network.
• Reconnect Click to reconnect a user that has
been previously blocked.
• Unauthorize (Available for Guests only.) Click
to block guest access and disconnect the
client.
Wireless Client – Details
MAC Address Displays the MAC address or unique
hardware identifier of the client.
Hostname Displays the customizable name or identifier
of the client.
IP Address Displays the IP address of the client.
Uptime Displays the duration of time the client has been
connected.
Connected AP Displays the hostname, alias, or MAC
address of the UniFi AP. You can click the name to get
additional details; see “UniFi Access Point Details” on
page 67 for more information.