Owners manual

77
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 13: UniFi VoIP Phone Details
Chapter 13: UniFi VoIP Phone
Details
A UniFi VoIP Phone hyperlink opens the UniFi VoIP Phone’s
Details window either in the Properties tab or as a separate
popup window. You can always dock this window in the
Properties tab or detach it as a separate window.
The top of the window displays the device icon and name
(or MAC address).
Properties
The Properties tab is hidden by default. To display it, click
the properties icon. The Properties tab appears on the
right side of the Devices screen.
Information about each selected device appears as a
popup within this tab.
Close Click to close the Properties tab and client
popups.
Minimize Click to display the clients as drop-down
rows.
Each row displays the following:
• (icon) Displays the icon of the device (the icon will vary
depending on the model).
• Name/MAC Address Displays the hostname, alias, or
MAC address of the device.
• Display Click to display the device information.
• Detach Click to display the same information in a
separate popup screen that can be moved anywhere
within the browser screen.
• Close Click to close the device popup.
Hide Click to hide the Properties tab but allow the
device popups to remain accessible from this tab.
The top part of the window displays the connection status:
• Pending Approval Default state, available for adoption.
• Connected Indicates a managed connection.
• Disconnected Indicates no connection.
There are two clickable tabs:
• Details
• “UniFi VoIP Phone – Configuration” on page 78
The bottom of the window has three buttons:
• Locate Click to ring the Phone and flash the
Phone’s icon on the Map tab so you can locate it. (The
Phone will ring three times and stop; the icon on the
Map tab will flash three times and stop.)
• Restart Click to restart the Phone.
• Upgrade If a software upgrade is available for the
Phone, click to install the latest UniFi firmware
on the Phone. The Status will appear as Upgrading until
the process is complete and the Phone reconnects to
the UniFi Controller software.
UniFi VoIP Phone – Details
The Overview displays the device specifics and uptime.
Overview
MAC Address Displays the MAC address or unique
hardware identifier of the Phone.
Model Displays the model name of the Phone.
Version Displays the version number of the Phone’s
firmware.
IP Address Displays the IP address of the Phone.
Uptime Displays the duration of time the Phone has been
running without interruption.