Owners manual

72
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 12: UniFi Access Point Details
WLANs
You can deploy multiple wireless networks organized into
WLAN groups on different APs.
WLAN Group Select the appropriate group from the
drop-down menu.
Name Displays the network name or SSID of the available
wireless network.
Overrides Displays the SSID override information applied
to the wireless network.
Actions Click a button to perform the desired action:
• Override Click Override to enable a VLAN (Virtual
Local Area Network), set the VLAN ID, and enter the SSID
override name to apply to the wireless network.
Note: The Override option is not available for a
Zero Handoff WLAN Group.
Override
Enabled Select the checkbox to enable override settings
on the AP
VLAN Select the checkbox to enable the VLAN.
• Use VLAN ID The VLAN ID is a unique value assigned
to each VLAN on a single device. Enter a value between
2 and 4095. For example, in a large deployment where
there are multiple buildings, you can use a different
VLAN ID for each building while all of the VLANs remain
on the same corporate network.
SSID Enter the SSID override name to apply to the
wireless network.
PSK If the WPA-Personal security option has been
applied to the WLAN under Settings > Wireless Networks,
then the Pre-Shared Key (PSK) for the SSID specified will
automatically appear in this field.
Actions Click a button to perform the desired action:
• Apply Click Apply to save changes.
• Restore Click Restore to remove any overrides that
were applied to the selected wireless network.
• Cancel Click Cancel to discard changes.