Owners manual

71
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 12: UniFi Access Point Details
UniFi Access Point – Configuration
Change device configuration settings.
Alias
Alias Enter or edit the customizable name or identifier of
the AP. The Alias is also known as the host name.
Apply Click Apply to save the change.
Radios
Channel Select the appropriate settings:
• Auto/(channel number) Select a channel number or
keep the default, Auto.
• HT20/HT40 Select HT20 for 20 MHz operation or HT40
for 40 MHz operation.
Note: If the AP is part of a Zero Handoff WLAN
Group, the Channel settings are chosen for you and
cannot be changed.
TX Power By default the transmit power is set to Auto.
You can also manually select the following:
• High The highest TX power available.
• Medium Halfway between High and Low.
• Low The lowest TX power available.
• Custom Custom setting that you specify in the field
provided. The Antenna Gain field also appears:
- Antenna Gain Specify the antenna gain for your
custom setting.
Apply Click Apply to save your changes.