Owners manual

69
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 12: UniFi Access Point Details
Uplink (Wireless)
If your AP has a wireless uplink connection, click Uplink
(Wireless) to display details about the wireless uplink.
Uplink AP Displays the name, alias, or MAC address of the
uplink AP. You can click the name to get additional details
on the uplink AP.
Signal Displays the percentage of signal strength
between the two APs.
TX Rate Displays the transmit rate.
RX Rate Displays the receive rate.
Down Pkts/Bytes Displays the amount of data
downloaded as packets and bytes.
Up Pkts/Bytes Displays the amount of data uploaded as
packets and bytes.
Activity Displays the level of activity in Bytes per second.
Downlink
The wireless APs currently connected to the wired AP are
displayed.
Note: Downlinks will only be visible under the Details
tab when a wireless AP is connected.
AP Displays the name, alias, or MAC address of the
downlink AP. You can click the name to get additional
details on the device.
Signal Displays the percentage of signal strength
between the two APs.
Actions Click a button to perform the desired action:
• Remove Remove the wireless AP from the wired AP.