Owners manual

64
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 11: UniFi Switch Details
• Advanced Options Click the icon to display the
following:
• Operation Select the operation mode for this port.
- Switching The default mode.
- Mirroring The network traffic of this port will receive
the mirrored traffic from the port listed below for
analysis:
• Mirroring Port Enter the number of the port that
will be mirrored.
- Aggregate A port channel, also known as a Link
Aggregation Group (LAG), combines multiple links
into a single logical link (single IP address) for load
balancing and/or redundancy. If you select this
option, then this port becomes the start port of the
aggregate link.
• Aggregate Ports Enter the end port number of the
LAG. (Two to four ports are permitted per LAG.)
• Apply Click Apply to save changes.
• Cancel Click Cancel to discard changes.
UniFi Switch – Configuration
Click Configuration to configure the alias, network/VLANs,
services, and network settings. You can also move the
Switch to another site.
Alias
Alias Displays the customizable name or identifier of the
Switch. The Alias is also known as the host name.
Apply Click Apply to save changes.
Networks/VLANs
Create Click to add a new entry. Go to “Create
New Network/VLAN” on page 65.