Owners manual

63
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 11: UniFi Switch Details
UniFi Switch – Ports
Click Ports to display the port name, status, TX and RX
throughput, PoE setting, and networks/VLANs.
Port Displays the port number.
Name Displays the name of the port.
Status Displays the connection speed and duplex mode.
TX Displays the amount of data transmitted.
RX Displays the amount of data received.
PoE Displays the PoE setting:
• Off PoE is disabled.
• 24V Passive 24V passive PoE is enabled.
• __W Power output is displayed in watts.
• PoE+ 802.3at/af devices can be plugged in and
automatically receive PoE.
Networks/VLANs Displays the networks/VLANs that the
port belongs to.
Actions Click a button to perform the desired action:
• Edit Click to change the port configuration. Proceed
to the following section, Port Configuration.
• Powercycle (Available only if the connected devices
uses PoE.) Click to restart the connected device.
Port Configuration
• Port Displays the number of the port.
• Name Displays the customizable name or identifier of
the port. Click Apply to save the change.
• PoE All ports are set to auto-sensing PoE+ by default.
- Off Disable PoE.
- 24V Passive Select this option to power devices that
support 24V passive PoE.
Note: Before activating 24V passive PoE, ensure
that the connected device supports PoE and the
supplied voltage.
- PoE+ 802.3at/af devices can be plugged in and
automatically receive PoE.
• Networks/VLANs Select the appropriate network or
VLAN, or select Disabled to disable this port. The default
is All.