Owners manual

61
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 11: UniFi Switch Details
Chapter 11: UniFi Switch
Details
A UniFi Switch hyperlink opens the UniFi Switch’s Details
window either in the Properties tab or as a separate popup
window. You can always dock this window in the Properties
tab or detach it as a separate window.
The top of the window displays the device icon and name
(or MAC address).
Properties
The Properties tab is hidden by default. To display it, click
the properties icon. The Properties tab appears on the
right side of the Devices screen.
Information about each selected device appears as a
popup within this tab.
Close Click to close the Properties tab and client
popups.
Minimize Click to display the clients as drop-down
rows.
Each row displays the following:
• (icon) Displays the icon of the device (the icon will vary
depending on the model).
• Name/MAC Address Displays the hostname, alias, or
MAC address of the device.
• Display Click to display the device information.
• Detach Click to display the same information in a
separate popup screen that can be moved anywhere
within the browser screen.
• Close Click to close the device popup.
Hide Click to hide the Properties tab but allow the
device popups to remain accessible from this tab.
The top part of the window displays the connection status:
• Pending Approval Default state, available for adoption.
• Connected Indicates a managed connection.
• Disconnected Indicates no connection.
The ports display their status:
Indicates a 10/100 Mbps connection.
Indicates 10/100 Mbps connection with PoE.
Indicates a 1000 Mbps connection.
Indicates 1000 Mbps connection with PoE.
Indicates no connection.
Place your cursor over a port to view the following:
• Port Displays the port number.
• Name Displays the name of the port.
• Status Displays the connection speed and duplex
mode.
• TX Displays the amount of data transmitted.
• RX Displays the amount of data received.
• PoE (Not applicable to the SFP ports.) Displays the PoE
setting:
- Off PoE is disabled.
- 24V Passive 24V passive PoE is enabled.
- __W Power output is displayed in watts.
- PoE+ 802.3at/af devices can be plugged in and
automatically receive PoE.
• Networks/VLANs Displays the networks/VLANs that
the port belongs to.
There are three clickable tabs:
• “UniFi Switch – Details” on page 62
• “UniFi Switch – Ports” on page 63
• “UniFi Switch – Configuration” on page 64