Owners manual

57
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 10: UniFi Security Gateway Details
UniFi Security Gateway –
Configuration
Click Configuration to configure the alias, WAN settings,
and port forwarding entries. You can also move the
Gateway to another site.
Config
Alias Displays the customizable name or identifier of the
Gateway. The Alias is also known as the host name.
Apply Click Apply to save the change.
WAN
Connection Type Select the Internet connection type for
your service.
• Using DHCP The use of the Dynamic Host
Configuration Protocol (DHCP) is the default. The
Gateway automatically acquires network settings from
the service provider’s DHCP server.
- Preferred DNS Enter the IP address of the service
provider’s primary DNS server.
- Alternate DNS Enter the IP address of the service
provider’s secondary DNS server.
• Apply Click Apply to save changes.
• Static IP The service provider assigns fixed network
settings to your service for manual entry. Enter the
following information:
- IP Address Enter the Internet IP address of the
Gateway.
- Subnet Mask Enter the subnet mask of the Gateway.
- Router Enter the IP address of the service provider’s
gateway router.
- Preferred DNS Enter the IP address of the service
provider’s primary DNS server.
- Alternate DNS Enter the IP address of the service
provider’s secondary DNS server.
• Apply Click Apply to save changes.