Owners manual

40
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 6: Clients
• Unauthorize (Available for Guests only.) Click
to remove authorization of wireless guest
access and disconnect the client.
Wireless
AP If the Wireless filter is applied, then the AP filter is
available:
• All Displays all wireless clients.
• 2G Only displays 2.4 GHz clients.
• 5G Only displays 5 GHz clients.
• AP Select the AP whose clients you want displayed.
Name/MAC Address Displays the hostname, alias, or
MAC address of the connected client. You can click the
name to get additional details; refer to “Client Details” on
page 79 for more information.
IP Address Displays the IP address used by the client.
Status (Displayed when the Guests filter is applied.)
Displays “Authorized” for all authorized guests.
WLAN Displays the name of the wireless network.
Access Point Displays the name of the connected AP.
Signal Displays the signal strength level and signal type:
Icon Clients Mode
5 GHz (802.11ac) Active
5 GHz (802.11ac) Power Save
5 GHz (802.11n) Active
5 GHz (802.11n) Power Save
2.4 GHz (802.11n) Active
2.4 GHz (802.11n) Power Save
2.4 GHz (802.11g) Active
2.4 GHz (802.11g) Power Save
2.4 GHz (802.11b) Active
2.4 GHz (802.11b) Power Save
Down Displays the total amount of data downloaded by
the client.
Up Displays the total amount of data uploaded by
theclient.
Activity Displays the level of activity for each client.
Bars Activity Level
(Bytes per second)
Idle
500
8000
64000
512000
2048000
Uptime Displays the amount of time the client has been
connected for this session.
Actions Click a button to perform the desired action:
• Block Click to block this client from accessing
the network.
• Reconnect Click to reconnect a client
that has been previously blocked. You can also click
to kick out a client, which usually reconnects
back quickly; this is useful for troubleshooting or
resolving a problematic wireless connection.
• Unauthorize (Available for Guests only.) Click
to remove authorization of wireless guest
access and disconnect the client.
Wired
Network If the Wired filter is applied, then the Network
filter is available.
• All Displays all wired clients.
• (name) Select the network whose clients you want
displayed.
Name/MAC Address Displays the hostname, alias, or
MAC address of the connected client. You can click the
name to get additional details; refer to “Client Details” on
page 79 for more information.
IP Address Displays the IP address used by the client.
Network Indicates which local network is used.