Owners manual

ManualsBrandsUbiquiti Networks ManualsComputers & LaptopsUniFi AP Enterprise WiFi System (UAP-AC-LITE-5-US)

UniFi® Controller User Guide

Ubiquiti Networks, Inc.

Chapter 5: Devices

Config

(icon) Displays the icon corresponding to the AP model

(not all icons are shown below):

UniFi AP AC

UniFi AP PRO

UniFi AP/AP LR

UniFi AP AC Outdoor

UniFi AP Outdoor+

UniFi AP Outdoor5

The LED color of the device icon indicates the device

status.

• Blue/Green Indicates the device is connected.

• Red/Orange Indicates the device is disconnected.

Name/MAC Address Displays the hostname, alias, or

MAC address of the AP. You can click the name to get

additional details; see “UniFi Access Point Details” on

page 67 for more information.

Status Displays the connection status.

• Connected The AP is physically wired to thenetwork.

• Connected (wireless) The AP is wirelessly uplinked to a

physically wired AP.

• Disconnected The AP is unreachable by the UniFi

Controller software.

• Isolated A managed AP is unable to locate itsuplink.

• Managed by Other The AP is not in the default state

but it is not controlled by the UniFi Controller.

• Pending Approval The AP is in the default state and is

available for adoption.

Model Displays the model name of the UniFi AP.

Version Displays the version number of the UniFi AP’s

firmware.

WLAN 2G Displays the name of the WLAN group using

the 2.4 GHz radio band.

WLAN 5G Displays the name of the WLAN group using

the 5 GHz radio band.

Radio 2G Displays the channel and TX power settings

used in the 2.4 GHz radio band.

Radio 5G Displays the channel and TX power settings

used in the 5 GHz radio band.

Actions Click a button to perform the desired action:

• Locate Click to flash the LED on the AP and the

AP’s icon on the Map tab so you can locate it. The LED

will flash until the Locate button is clicked again. (The

icon on the Map tab will flash three times and stop.)

• Restart Click

to restart the selected device.

• Upgrade If a software upgrade is available for the

device, click

to install the latest UniFi firmware

on the device. The Status will appear as Upgrading until

the process is complete and the device reconnects to

the UniFi Controller software.

• Adopt Click

to adopt a device that appears as

Pending Approval for its status. The Status will appear as

Adopting until the device is connected.

Performance