Owners manual

34
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 5: Devices
If displayed, the LED color of the device icon indicates the
device status.
• Blue/Green Indicates the device is connected.
• Red/Orange Indicates the device is disconnected.
Name/MAC Address Displays the hostname, alias, or
MAC address of the UniFi device. You can click the name
to get additional details. For more information, see the
appropriate chapter:
• “UniFi Security Gateway Details” on page 55
• “UniFi Switch Details” on page 61
• “UniFi Access Point Details” on page 67
• “UniFi VoIP Phone Details” on page 77
IP Address Displays the IP address used by the UniFi
device.
Status Indicates the device status: Connected,
Disconnected, Pending Approval, Adopting, Upgrading,
Managed by Other, or Isolated (APs only).
Model Displays the model name of the UniFi device.
Version Displays the version number of the UniFi device’s
firmware.
Uptime Displays the duration of time the UniFi device has
been running.
Actions Click a button to perform the desired action:
• Locate For most devices, click
to flash the LED
on the physical device and the device’s icon on the
Map tab so you can locate it. The LED will flash until the
Locate button is clicked again. (The icon on the Map tab
will flash three times and stop.)
If the device is a Phone, then click to ring the
Phone and flash the Phone’s icon on the Map tab so you
can locate it. (The Phone will ring three times and stop;
the icon on the Map tab will flash three times and stop.)
• Restart Click
to restart the selected device.
• Upgrade If a software upgrade is available for the
device, click to install the latest UniFi firmware
on the device. The Status will appear as Upgrading until
the process is complete and the device reconnects to
the UniFi Controller software.
• Adopt Click to adopt a device that appears as
Pending Approval for its status. The Status will appear as
Adopting until the device is connected.
Gateway/Switches
All UniFi Gateway and Switch devices are displayed.
(icon) Displays the icon corresponding to the UniFi device
(not all icons are shown below):
UniFi Security Gateway
UniFi 24-Port Switch
UniFi 48-Port Switch
The LED color of the device icon indicates the device
status.
• Blue Indicates the device is connected.
• Red Indicates the device is disconnected.
Name/MAC Address Displays the hostname, alias, or
MAC address of the UniFi device. You can click the name
to get additional details. For more information, see the
appropriate chapter:
• “UniFi Security Gateway Details” on page 55
• “UniFi Switch Details” on page 61
IP Address Displays the IP address used by the UniFi
device.
Status Indicates the device status: Connected,
Disconnected, Pending Approval, Adopting, Upgrading, or
Managed by Other.
Model Displays the model name of the UniFi device.
Down Displays the total amount of data downloaded by
the UniFi device.
Up Displays the total amount of data uploaded by
theUniFi device.
Actions Click a button to perform the desired action:
• Locate Click
to flash the Status LED on the
Gateway/Switch and its icon on the Map tab so you can
locate it. The LED will flash until the Locate button is
clicked again. (The icon on the Map tab will flash three
times and stop.)
• Restart Click to restart the selected device.