Owners manual
33
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 5: Devices
Chapter 5: Devices
The Devices screen displays a list of UniFi devices
discovered by the UniFi Controller. You can click any of the
column headers to change the listorder.
Search Enter the text you want to search for. Simply
begin typing; there is no need to press Enter.
You can apply one of the following primary filters:
• All Displays all UniFi devices.
• Gateway/Switches Displays all UniFi Security Gateways
and Switches.
• APs Displays all UniFi APs.
• Phones Displays all UniFi VoIP Phones. (Enable VoIP
“Settings > VoIP” on page 16.)
If the APs filter is applied, then another filter is available:
• Overview Displays the number of clients, amount
of data downloaded, amount of data uploaded, and
channel setting.
• Config Displays the WLAN and radio settings for the
2.4GHz and 5 GHz radio bands.
• Performance Displays the number of 2.4 GHz and
5GHz clients, overall transmit rate, overall receive rate,
transmit rates in the 2.4 GHz and 5GHz radio bands, and
channel setting.
The columns of information vary depending on which
primary filter (All, Gateway/Switches, APs, or Phones) is
applied.
If there is more than one page of entries to display, click
the navigation controls or page numbers at the bottom
right of the screen to display different pages.
All
All UniFi device types are displayed.
(icon) Displays the icon corresponding to the UniFi device
(not all icons are shown below):
UniFi AP AC
UniFi AP PRO
UniFi AP/AP LR
UniFi AP AC Outdoor
UniFi AP Outdoor+
UniFi AP Outdoor5
UniFi Security Gateway
UniFi 24-Port Switch
UniFi 48-Port Switch
UniFi VoIP Phone/Pro
UniFi VoIP Phone Executive