Owners manual

18
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 2: Using the UniFi Controller Software
The new phone numbers you create will appear on the
VoIP screen:
Number The phone number is displayed.
Extension The extension number is displayed. You can
select a different extension number from the drop-down
menu.
Type The type of extension number: Phone,
Auto-Responder, Conference, or Group is displayed.
Actions
Save Click
to apply changes.
Settings > Extensions
The Extensions tab appears if VoIP is enabled.
Extension Displays the number of the extension.
Name Displays the name of the extension.
Direct Line Displays the direct dial number (if applicable).
Type Displays the type of extension: Auto-Responder,
Phone, Group, or Conference.
Actions Click a button to perform the desired action:
• Edit Click to make changes to the user group
settings. Go to the Create or Edit an Extension section
below.
• Delete Click to delete the extension. (The
Auto-Responder cannot be deleted.)
Create New Extension Click to add a new
extension. Go to the Create or Edit an Extension section
below.
Create New Group Click to add a new group.
Go to the “Create or Edit a Group” on page 18.
Create New Conference Click to add a
new conference. Go to “Create or Edit a Conference” on
page 19.
Create or Edit an Extension
• Extension Enter the extension number. The default is
101.
• Name Enter a name for the extension.
• Phone Select the MAC address of the appropriate UniFi
VoIP Phone.
• Email Enter the email address of the extension contact.
• Save Click to apply changes.
• Cancel Click
CANCEL
to discard changes.
Create or Edit a Group
• Extension Enter the extension number. The default is
200.
• Name Enter a name for the group.
• Call Screening Disabled by default. Click On to screen
calls to this group.
• Members Enter the name or email address of the
extension to add. When the appropriate extension is
shown in the drop-down list, select it.