Owners manual

17
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 2: Using the UniFi Controller Software
- IP-Based If your VoIP system uses a static IP address,
then select this option.
• Advanced Options Click the arrow to display the
following:
• Outbound Proxy Enter the URL or IP address of
the SIP proxy server.
• Authorization ID Enter the username used for
authorization or authentication.
• SIP Voicemail Enter the URL or IP address of the
SIP voicemail server.
• Tech Prefix Enter the technology prefix (leading
digits) that should be prepended (added) to
outbound numbers.
• SIP From User Enter the SIP address in the
format: username@domain, which is similar to an
email address.
• Apply Click
to save changes.
• Cancel Click
CANCEL
to discard changes.
External
Select this option if you are using an external PBX; the
UniFi Controller only manages the UniFi VoIP Phones.
• SIP Server Enter the IP address of your SIP server.
• SIP Authentication Method Select the authentication
method used for your SIP account:
- User-Based (Most Common) If your VoIP system uses
a dynamic IP address, then select this option.
- IP-Based If your VoIP system uses a static IP address,
then select this option.
Note: If an external PBX is used, then the
Auto-Responder and other PBX settings will not be
shown because they are not available.
• Advanced Options Click the
arrow to display the
following:
- SIP Voicemail Enter the URL or IP address of the SIP
voicemail server.
• Apply Click
to save changes.
• Cancel Click
CANCEL
to discard changes.
None
Select this option for local testing only.
• Apply Click to save changes.
• Cancel Click
CANCEL
to discard changes.
Add Click this option to set up a new number. The Ceate
New Number screen appears:
VoIP > Create New Number
• Number Enter the new phone number.
• Extension Select the appropriate extension number.
• Save Click to apply changes.
• Cancel Click
CANCEL
to discard changes.