Owners manual

16
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 2: Using the UniFi Controller Software
Create or Edit a User Group
• Name Enter or edit the name of the user group.
• Bandwidth Limit (Download) Select to limit the
download bandwidth. Enter the maximum in Kbps.
• Bandwidth Limit (Upload) Select to limit the upload
bandwidth. Enter the maximum in Kbps.
• Save Click to apply changes.
• Cancel Click
CANCEL
to discard changes.
See “Wireless Client – Configuration” on page 80
or “Wired Client – Configuration” on page 82
for information on how to assign a user or guest to a
usergroup.
Settings > VoIP
Enable the VoIP feature and configure the VoIP settings of
the UniFi Controller.
Global
VoIP Select this option to enable the VoIP feature.
Platform Image Cache Select this option to enable the
automatic update of the cached platform image.
Apply Click
to save the change.
Cancel Click
CANCEL
to discard the change.
Provider & Numbers
When enabled, UniFi will send email alerts triggered by
pending and disconnected UniFi devices. Specify the
administrator email address when you create an account
under “Settings > Wireless Networks” on page 7.
VoIP Provider Displays the Session Initiation Protocol
(SIP) provider type.
Setup Click this option to set up the SIP provider. The
Provider Setup screen appears:
VoIP > Provider Setup
• SIP Provider Select the appropriate provider type:
Manual, External, or None. Then follow the appropriate
instructions.
Manual
Select this option if you are using the UniFi Security
Gateway as your PBX with your own SIP credentials.
• SIP Server Enter the IP address of your SIP server.
• SIP Authentication Method Select the authentication
method used for your SIP account:
- User-Based (Most Common) If your VoIP system
uses a dynamic IP address, then select this option and
enter the following:
• SIP Username Enter the username for your SIP
account.
• SIP Password Enter the password for your SIP
account.
• Advanced Options Click the arrow to display the
following:
• SIP Voicemail Enter the URL or IP address of the
SIP voicemail server.