Owners manual

15
UniFi® Controller User Guide
Ubiquiti Networks, Inc.
Chapter 2: Using the UniFi Controller Software
Access Control
Restricted Subnets Enter any subnets that you don’t
want guests to be able to access. Click the delete icon to
remove a subnet from this list.
Add New Click Add New to add more restricted subnets.
Allowed Subnets Enter any subnets that you want guests
to be able to access. Click delete
to remove a subnet
from this list.
Add New Click Add New to add more allowed subnets.
Apply Click to save changes.
Settings > Admins
You can create administrator accounts that are
site-specific; these site administrators can only see the
sites they manage.
The superadmin account is created during the Setup
Wizard and has global admin (read/write) access; this
superadmin account cannot be revoked or re-invited.
The list of administrator accounts also includes the
operator accounts created in Hotspot Manager; see
“Operator Accounts” on page 86.
Username Displays the name of the administrator.
Email Displays the email address of the administrator.
Role Displays the permissions level: Admin (read/write
access), Read-only, or Hotspot (operator read-only access).
Actions Click a button to perform the desired action:
• Revoke Click to remove the selected account.
• Edit Click to make changes.
Create New Admin Click
to add a new site
admin or operator. Go to the Create or Edit an Admin
section.
Create or Edit an Admin
• Email Enter the email address of the new administrator.
• Admin Name Enter the name of the new administrator.
• Role Select Administrator (read/write access) or
ReadOnly.
• Invite Click to send an email invitation.
• Cancel Click
CANCEL
to discard changes.
Settings > User Groups
Configure user groups on this screen. The default user
group is named Default and has no bandwidth limits.
User Group Settings
Name Displays the name of the user group.
Bandwidth Limit Displays the upload and download
limits.
Actions Click a button to perform the desired action:
• Edit Click to make changes to the user group
settings. Go to “Create or Edit a User Group” on page
16.
• Delete Click to delete the user group. (The
Default user group cannot be deleted.)
Create New User Group Click
to create a
new user group. Go to “Create or Edit a User Group” on
page 16.