Owners manual

18
Chapter 4: Map TabUniFi AP/AP-LR User Guide
Ubiquiti Networks, Inc.
Wired/Wireless Access Point Shows the
location of the Access Point on the map.
Click and hold this icon to drag the Access Point
to another location on the map. Click on the
Access Point icon to reveal additional options.
Click a blank area of the map to hide them.
Lock Locks the selected Access Point in the
current location on the map.
Details Brings up the Details window. This
allows you to view Access Point settings and
connected users. You can also edit the radio
channel, transmit power, uplink and device alias.
There are 4 tabs to select from in the Details
window. Details, Users, Guests, and Configuration.
 Details Displays details on the Access Point
including the MAC address, model, version,
IP address, uptime, connected users, and
connected guests. Click Uplink (Wire) to
display the speed, duplex, Down Pkts / Bytes,
Up Pkts / Bytes and Activity. Click Radio to
display the channel used, transmit power, and
packet information.
 Users Displays the hostname of the users that
are connected to the selected Access Point
and the IP address assigned to them.
You can click on the hostname to display
additional details of each user. A window
with Details, Statistics, and Configuration is
displayed. The Details tab displays the MAC
address, hostname, IP address, uptime and
the Access Point they are connected to. The
Statistics tab displays the channel used, signal
strength, transmit and receive rates, power
saving enabled or disabled, and the number
of packets sent and received. You can also
click History to see a sortable list of events.
The Configuration tab allows you to change
the alias name for the device.

Guests Displays the MAC address of guests
that are connected to the guest network.
 Configuration Allows you to change the alias
name of the device, the channel setting, and
set the transmit power to Auto, High, Medium,
Low or Custom. You can also remove the
Access Point if you no longer want to manage
it with the UniFi Controller software.
Remove Remove the Access Point from the
location on the map.
Show: You can click each of the following options to
display Access Point labels, details, wireless coverage and
topology on the map.
 Labels Displays the name applied to the Access Point.
Refer to Alias under “Configuration” on page 28 to
change a name applied to an Access Point. If no custom
label is applied, the Access Point’s MAC address will be
displayed.
 Details Displays the Access Point name, MAC address,
transmit/receive channel, number of users connected,
and number of guests connected.