Spec Sheet

5
Datasheet
To enhance airMAX ac performance,
Ubiquiti Networks introduces our
patented airPrism technology, which
is featured on the Rocket Prism 5AC
Gen 2, model RP‑5AC‑Gen2.
Improves SNR
High data rates require a high
Signal‑to‑Noise Ratio (SNR), which is
challenging to achieve, especially in
noisy, high‑density areas.
Integrated into Ubiquiti’s custom
silicon, airPrism technology creates a
high SNR by isolating signals within
the operating channel and rejecting
interference using specialized circuitry,
the High-Selectivity Receiver(HSR).
Active Radio Frequency Filtering
5 GHz with airPrism5 GHz Environment
What the Radio Sees
Removes Interference
Depending on the product model and
operating mode, available channel
widths may include 10, 20, 30, 40, 50,
60, and/or 80 MHz.
Theoretically APs operate on different
channels; however, because of the
wider channel bandwidths, there can
be overlap in spectrum usage.
airPrism technology removes up to an
additional 30+dB of adjacent channel
interference through the active
ltering design, so an airMAXac AP
with airPrism technology can provide
signicantly greater performance than
a typical AP.
Facilitates AP Co-Location
Co‑location is vital in many scenarios.
For example, a WISP may have limited
tower space, so it must co‑locate all
APs within that allotted footprint.
Shielding and other means can lessen
interference but may be impractical.
By deploying airMAX ac APs with
airPrism technology, you can
co‑locate APs and enhance the overall
performance of your wireless network.
Number of APs Channel Width
4 80 MHz*
8 40 MHz
16 20 MHz
* PtP only
Technology
Improved Latency and Noise Immunity
H
V