Quick Start Guide

14
Rocket
™
M Titanium Quick Start Guide
Interference will cause Receive (RX) errors on the basestation
when it receives packets from associated stations that are typically
miles away.
With airSync, the basestations make use of a common clock source
using the built-in GPS receiver. One device is configured as the
synchronization master and the others are configured in Slave
Mode and provided with the MAC address of the Master.
Once this is done, the Master and Slave devices synchronize their
transmit and receive cycles so that they transmit at the same time
and receive at the same time. This resolves the interference issues.
Enabling Master/Slave Mode
1. Launch your web browser and log in to the airOS Configuration
Interface (see page 12 for login details).
2. Click the Ubiquiti
tab.
3. Select the appropriate mode:
• Master Mode (synchronization master device)
• Slave Mode (slave devices)
Note: Enter the MAC address of the Master in the Sync
Master field.