Datasheet

Datasheet
8
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor
installations. It is the installer’s responsibility to follow local country regulations, including operation within
legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.
For further information, please visit www.ubnt.com.
All speci cations in this document are subject to change without notice.
www.ubnt.com
© 2012 Ubiquiti Networks, Inc. All rights reserved.
Protect your networks from the most
brutal environments with Ubiquiti
Networks’ industrial-grade, shielded
Ethernet cable, TOUGHCable.
Increase Performance
Dramatically improve your
Ethernet link states, speeds, and
overall performance with Ubiquiti
TOUGHCables.
Extreme Weatherproof
Designed for outdoor use,
TOUGHCables have been built to
perform even in the harshest weather
and environments.
ESD Damage Protection
Protect your networks from
devastating electrostatic discharge
(ESD) attacks.
Extended Cable Support
TOUGHCables have been developed
to increase power handling
performance for extended cable run
lengths.
Bulletproof your networks
TOUGHCable is currently available in
two versions: PRO Shielding Protection
and CARRIER Shielding Protection.
TOUGHCable PRO
is a Category 5e,
outdoor, carrier-class shielded cable
with an integrated ESD drain wire.
TOUGHCable CARRIER
is a
Category5e, outdoor, carrier-class
shielded cable that features
an integrated ESD drain wire,
anti-crosstalk divider, and secondary
shielding. It is rated to provide optimal
performance on Gigabit Ethernet
networks.
Additional Information:
• 24 AWG copper conductor pairs
• 26 AWG integrated ESD drain wire
to prevent ESD attacks and damage
• PE outdoor-rated, weatherproof
jacket
• Multi-layered shielding
• Available in lengths of 1000 ft
(304.8m)
TOUGHCable Connectors
Speci cally designed for use with Ubiquiti TOUGHCables and available in
100-pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet
hardware damage, while allowing rapid  eld deployment without soldering.
ESD attacks are the leading
cause for device failures. The
diagram below illustrates the
areas vulnerable to ESD attacks
in a network.
By using a grounded Ubiquiti TOUGHSwitch
PoE with Ubiquiti TOUGHCable and
TOUGHCable Connectors, you can effectively
protect against ESD attacks.
Unshielded
cable with
no ESD drain
PoE adapter with
no earth ground
Ubiquiti
TOUGHCable
Ubiquiti
TOUGHSwitch
PoE
PHJL110112