Instruction Manual

25
Chapter 4: Wireless TabairOS
™
v5.5.4 User Guide
Ubiquiti Networks, Inc.
MAC ACL
The options below apply in Access Point or AP‑Repeater
mode only.
MAC ACL The MAC address Access Control List (ACL) lets
you allow or deny clients connectivity to the device. When
enabled, you have the following options:
Policy Select one of the policy types:
• Allow Wireless clients on the list can access the device.
Any wireless client that is not on the list is denied access
to the device.
• Deny Wireless clients on the list are denied access to
the device. Any wireless client that is not on the list can
access the device.
• ACL To add MAC addresses of wireless clients, click ACL.
- Enabled The policy is applied to this wireless client.
- MAC Enter the MAC address in this format:
XX:XX:XX:XX:XX:XX (each X represents a valid
hexadecimal character: 0-9, A-F, or a-f ).
- Comment Enter a description of the wireless client.
- Action Click Add to add the MAC address of a
wireless client. Click Del to remove the MAC address
of a wireless client. Click Edit to make changes to an
entry.
Note: MAC ACL should be used in combination
with a security method such as WPA or WPA2.
It should not be used as the only method of
security on your network.