Datasheet 5 GHz airMAX® ac Bridge with RF Isolated Reflector Models: PBE-5AC-300-ISO, PBE-5AC-400-ISO, PBE-5AC-500-ISO Uniform Beamwidth Maximizes Noise Immunity Integrated Isolator Design Improves RF Isolation High-Speed Processor for Superior Performance
Datasheet Overview Application Examples PtMP Client Links Ubiquiti Networks launches the PowerBeam® ac ISO, an airMAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation. Improved Noise Immunity The PowerBeam ac ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference.
Advanced RF Analytics Multi-Radio Architecture Datasheet airMAX ac devices feature a multi‑radio architecture to power a revolutionary RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum and every received symbol to provide you with the most advanced RF analytics in the industry. Data from the spectrum analysis and RF performance monitoring is displayed on the Main tab and airView Spectrum Analyzer of airOS V7.
Intelligent QoS Priority assigned to voice/video for seamless streaming. Scalability High capacity and scalability. Time Slot 4 Time Slot 3 Time Slot 2 VOIP VOIP Time Slots Data This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class.
PBE-5AC-300-ISO PBE-5AC-400-ISO PBE-5AC-500-ISO Frequency Band 5 GHz 5 GHz 5 GHz Antenna Gain 22 dBi 25 dBi 27 dBi Dish Reflector 300 mm 400 mm 500 mm Datasheet Model Comparison Hardware Overview Breakthrough RF Isolation The integrated isolator design spatially filters out interference, so the PowerBeam ac ISO delivers improved noise immunity in co-location deployments. Compare the two near-field plots below, and note the superior performance of the integrated RF isolator.
Datasheet Specifications PBE-5AC-300-ISO Dimensions 364 x 364 x 276 mm (14.33 x 14.33 x 10.87") Weight 2.55 kg (5.62 lb) Power Supply 24V, 0.5A Gigabit PoE Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Supported Voltage Range 20-26VDC Max. Power Consumption 5.
Vertical Elevation Horizontal Azimuth Horizontal Elevation Datasheet Vertical Azimuth Return Loss 7
Datasheet Specifications PBE-5AC-400-ISO Dimensions 459 x 459 x 261 mm (18.07 x 18.07 x 10.28") Weight 3.22 kg (7.10 lb) Power Supply 24V, 0.5A Gigabit PoE Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Supported Voltage Range 20-26VDC Max. Power Consumption 8.
Vertical Elevation Horizontal Azimuth Horizontal Elevation Datasheet Vertical Azimuth Return Loss 9
Datasheet Specifications PBE-5AC-500-ISO Dimensions 564 x 564 x 308 mm (22.20 x 22.20 x 12.13") Weight 5.2 kg (11.5 lb) Power Supply 24V, 0.5A Gigabit PoE Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Supported Voltage Range 20-26VDC Max.
Vertical Elevation Horizontal Azimuth Horizontal Elevation Datasheet Vertical Azimuth Specifications are subject to change. Ubiquiti products are sold with a limited warranty described at: www.ubnt.com/support/warranty ©2015 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, airMAX, airOS, airView, InnerFeed, and PowerBeam are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries.
