Quick Start Guide

5. Attach the Azimuth Alignment Bracket to the pole:
a. Slide the slot of each Pole Clamp over the
corresponding CarriageBolt.
b. Tighten the four Serrated Flange Nuts to secure the
Azimuth Alignment Bracket to the pole.
6. Attach the Elevation Alignment Bracket to the Azimuth
Alignment Bracket:
a. Insert the four hex head bolts of the Elevation Alignment
Bracket into the slots of the Azimuth Alignment Bracket.
b. Slide the Elevation Alignment Bracket down, and tighten
the four hex head bolts to 25 N‑m.
25 N-m