Quick Start Guide

Introduction
Thank you for purchasing the Ubiquiti Networks® NanoStation®
5AC loco. This Quick Start Guide is designed to guide you
through the installation and also includes warranty terms.
Package Contents
NanoStation
loco
Wall Mount Bracket Screws
(Qty. 2)
Screw Anchors
(Qty. 2)
5 GHz, 13 dBi airMAX
®
CPE
Model: NS-5AC-G2
Zip Tie Gigabit PoE (24V, 0.5A)
with Mounting Bracket
Power Cord Quick Start
Guide
Installation Requirements
• Phillips screwdriver for wall-mounting
• Shielded Category 5 (or above) cabling for all wired Ethernet
connections
We recommend that you protect your networks from
harmful outdoor environments and destructive ESD events
with industrial-grade, shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
™
is
designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.