Quick Start Guide

Accessing airOS via Wi-Fi
Verify connectivity in the airOS Configuration Interface.
There are two methods: U Mobile App and Web Portal. Both
are available for 15 minutes immediately after you power on
the NanoStation loco. If necessary, you can power cycle the
NanoStation loco to re-enable its Wi-Fi.
Proceed to the section that corresponds with your preferred
method:
U Mobile App
1. Download the U Mobile app from the AppStore (iOS) or
Google Play
™
(Android).
2. Connect your device’s Wi-Fi to the NanoStation loco SSID
named: NS-5ACL:<MAC Address>
Note: Ensure that DHCP is enabled on your
Wi‑Fiadapter.
3. Launch the app.
4. Tap the NanoStation loco listed on the Connections screen.