User Manual

3
NanoBridge Installation
NanoBridge Installation
These instructions cover the NanoBridge M, NB-2G18 and NB5G25.
Package Contents
Parabolic Reflector/Dish Antenna Feed Feed Support Dish Bracket
Pole Bracket
Clamp
M6 U-Bolt
(Qty. 2)
M6x12 Carriage
Bolt (Qty. 4)
M6 Serrated
Flange Nut (Qty. 6)
Feed Support
Bushing
M6 Bolt-Spring-Lock
Washer Assembly (Qty. 4)
* Products may be different from pictures and are subject to change without notice.
Installation Requirements
• 10 mm wrench
Installation
1. Install the Feed Support into the Dish Bracket using four M6 Bolt-
Spring-Lock-Washer Assemblies.