User's Manual

Hardware Overview
M/N: NBE-2AC-13
24V 0.5A GigE PoE
This devic e complies with P art 15 of FCC rules.
Operation is s ubject to the followin g 2 conditions:
1) this device may no t cause harmful inte rference and,
2) this device m ust accept any inter ference received ,
including interference that may cause undesired
operation.
Compliant
RoHS
FCC ID: SWX-NBE2ACN IC: 6545A-NBE2ACN
Polarity Align
2.4 GHz
LEDs
Reset Button
Ethernet Port
(10/100/1000 Mbps)
Reset Button To reset to factory defaults, press and hold the
Reset button for more than 10 seconds while the NanoBeam
is already poweredon. Alternatively, the NanoBeam may be
reset remotely via a Reset button located on the bottom of the
Gigabit PoE Adapter.
Ethernet Port This Gigabit Ethernet port is used to connect
the power and should be connected to the LAN and DHCP
server. Power can be provided by any of the following:
Gigabit PoE adapter (included)
Ubiquiti Networks EdgeSwitch®
Ubiquiti Networks EdgeRouter
PoE