User's Manual
Accessing airOS via Wi-Fi
Verify connectivity in the airOS Configuration Interface. There
are two methods, the U Mobile App and Web Portal. Both are
available for 15 minutes immediately after you power on the
NanoBeam. If necessary, you can power cycle the NanoBeam
to re-enable its Wi-Fi.
Proceed to the appropriate instructions:
U Mobile App
1. Download the U Mobile app from the AppStore (iOS) or
Google Play
™
(Android).
2. Connect your device’s Wi-Fi to the NanoBeam SSID
named: NBE-2AC-13:<MAC Address>
Note: Ensure that DHCP is enabled on your
Wi-Fiadapter.
3. Launch the app.
4. Tap the NanoBeam on the Connections screen.
Connections Install Settings
NBE-2AC-13: F09FC71EXXXX
NanoBeam 2AC 13
Available
19 2.16 8.172 .1
Connections
8
:
08 100 %