Spec Sheet

Datasheet
2
Application Examples
PtMP Client Links
The NanoBeam 5AC Gen 2 used as a CPE device for each client in an airMAX PtMP
network.
Wireless Client
PtP Link
The NanoBeam 5AC Gen 2 as a
powerful wirelessclient.
Use a NanoBeam 5AC Gen 2 on each side
of a PtPlink.
Overview
Ubiquiti Networks launches the
latest generation of airMAX® CPE
(Customer Premises Equipment), the
NanoBeam®5AC Gen 2.
Improved Noise Immunity
The NanoBeam 5AC Gen 2 directs
RF energy in a tighter beamwidth.
With the focus in one direction, the
NanoBeam 5AC Gen 2 blocks or
spatially lters out noise, so noise
immunity is improved. This feature
is especially important in an area
crowded with other RF signals of the
same or similar frequency.
Integrated Design
The radio and antenna are combined
to create a more efcient and compact
CPE. The NanoBeam 5AC Gen 2 gets
maximum gain out of the smallest
footprint.
Providing high performance and
an innovative form factor, the
NanoBeam 5AC Gen 2 is versatile and
cost‑effective to deploy.
Software
airOS® 8 is the revolutionary operating
system for Ubiquiti® airMAX ac
products.
Powerful Wireless Features
• Access Point PtMP airMAX Mixed
Mode
• airMAX ac Protocol Support
• Long-Range Point-to-Point (PtP)
Link Mode
• Selectable Channel Width
• PtP: 10/20/30/40/50/60/80 MHz
• PtMP: 10/20/30/40 MHz
• Automatic Channel Selection
• Transmit Power Control:
Automatic/Manual
• Automatic Distance Selection
(ACK Timing)
• Strongest WPA2 Security
Usability Enhancements
• airMagic® Channel Selection Tool
• Redesigned User Interface
• Dynamic Conguration Changes
• Instant Input Validation
• HTML5 Technology
• Optimization for Mobile Devices
• Detailed Device Statistics
• Comprehensive Array of Diagnostic
Tools, including RF Diagnostics and
airView® Spectrum Analyzer