User guide

3
Hardware Overview
LEDs
LAN2LAN1
Power The Power LED will light green when the
device is connected to a power source.
LAN1 WAN/Main Ethernet The LAN1 Ethernet LED
will light steady green when an active Ethernet
connection is made to the Primary Ethernet Port and
flash when there is activity.
LAN2
LAN/Secondary Ethernet (NanoStation M2/M3/M5
only) The LAN2 Ethernet LED will light steady green
when an active Ethernet connection is made to
the Secondary Ethernet Port and flash when there
isactivity.
Signal In airOS, you can modify the wireless signal
strength threshold values for each LED on the
Advanced tab under Signal LED Thresholds. The
default values are shown below:
LED will light red when the wireless signal
strength is above -94 dBm.
LED will light amber when the wireless signal
strength is above -80 dBm.
LED will light green when the wireless signal
strength is above -73 dBm.
LED will light green when the wireless signal
strength is above -65 dBm.