mA" Wall Mount Motion Sensor Compliance FOC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful Interference, and 2 this device must accept any interference received, Including Interference that may cause undesired operation.
mA" Wall Mount Motion Sensor General Warranty Jumper Settings The mi-MSW has jumpers located inside the product casing, Typically there Is no need to pane the casing to adjust the jumpers. The SENS and LED jumpers are the only ‘ans that you may want to change. The SENS jumper could be changed to reduce the sensitivity of the microwave sensor. The LED jumper could be muted an so the LED Is visible when the motion sensor is triggered.
mA" Wall Mount Motion Sensor General Warranty UBIQUITY NETWORKS, Inc (‘UBIQUITY NETWORKS} represents and warrants that the Products famished hereunder shall be free from defects In material and workmanship for a period of one (1) year from the date of shipment by UBIQUITY NETWORKS under normal use and operation, UBIQUITY NETWORKS sole and exclusive obligation under the foregoing warranty shall be to repair or replace, at hts option, any defective Product that falls during the warranty period.
