Support Wiki Page Support Forum Downloads supportable wikl.ubnt.com dovmloads.ubnt.
mA" mPower™ PRO Quick Start Guide WiFi Products Ubiquity Networks offers a variety of products for the mi platform. For additional details, visit * a Uncompelling Wall Mount Temperature Motion Sensor Motion Sensor Sensor FLAX EME ETH Cu rent Sensor Door Sensor Thermostat BFE EOE Canning Soon m Port Serial Power Adapter Power Strip rems maw mind mor tows introduction Thank you for purchasing the Ubiquity Networks™ mF™ mPower™ PRO. The mF m Power PRC Is designed for use with the mFi platform.
mA" mPower™ PRO Quick Start Guide Compliance FCC Changes or modifications nok expressly proved by Ubi Networks, Inc. could cold the user's authority to operate the equipment. ‘This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause Interference, and 2. This advice must accept any forbearance, Ix duding Intracranial that may cause undesired operation of the device.
mA" mPower™ PRO Quick Start Guide Hardware Installation The m Power PRO can connect to your network using Theme or WiFi. To configure the m Power PRO for use an a WIFI network, you must first configure ft using the Theme connection. 1. Connect an Theme cable from your LAN to the Ethernet part on the m Power PRO, FZ] Note: WHA settings for the m Power PRO can be 1 configured via LAN or by connecting an Theme cable directly from your computer.
mM Disclaimer: UBIQUITY! NETWORKS does nat warrant that the operation mA" mPower™ PRO Quick Start Guide Hardware Installation QUALITY, LACK OF VIRUSES, TITLE, GUILT ENJOYMENT, FITNESS. FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. BUYER ACKNOWLEDGE THAT NEITHER UBIQUITY NETWORKS NOR ITS ‘THIRD PARTY PROVIDERS CONTROLS BUYER'S EQUIPMENT GR ‘THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE PRODUCTS AND SERVICES.
mA" mPower™ PRO Quick Start Guide Software Download and Installation For local mFi Controller installations, the mFi Controller software Is Installed Just once when you Initially create a mFi network. tis not necessary to go through the software Installation process every time you add another mH device. A Note: If you are using the dud, there Is no need to BE! install the mi controller software locally, Skip to Acceding the Configuration Potion page 13.
mA" mPower™ PRO Quick Start Guide Specifications Di mansions Weight hunting Utes Networking interface ERS Mamore iE Operating Temperature Humility 25037 x 1167 x42 rom aay Wl (Kn Encoded) THIEVISH, 50-60, 154 Per Cuties, 45 A Tomsk 8 {3} 10/100 Ethane Part suing 16 115 RAM, 5 MB Flash LED taut} Gla C RF bas, Software Download and Installation 2. Click Continue and follow the on-screen Instructions to Install the software. sr or Eid 3. Goth Go> Applications and double-click the mA Icon.
mA" mPower™ PRO Quick Start Guide Software Download and Installation PE Users 1. Launch preinstalled. 2 Click install oti tm 6 Sp SARS 3. If your computer doesn't have Java 1.6 or above installed, you will be prompted to install it. Click Install to continue. Wireless Settings To use the m Power PRO on a WIFI network, configure the Wireless Settings: a. Click Scan for a list of available SS IDs and select the appropriate SAID or type In the name manually in the SAID field. b.
mA" mPower™ PRO Quick Start Guide 3 Enter your configuration Informative an the Configuration tab: Fi Contralto Enter the mF Controller settings: a. Enter the mFl Controller address. + For local mA Controller Installations, this Is the 1P address and HTTP port used by the Controller. (The port ks usually 6060, for example: or + For dud users, this is mfi.ubmt.com b. Enter the User Name and Password.
mA" mPower™ PRO Quick Start Guide Configuring the mF Controller Software 1 The mF| Controller software startup will begin. Click Launch a Browser to Manage the Network. The mF Configuration Wizard wil appear the first time you launch the mF| Controller software. On the Welcome screen, select your language and country. Click Next. Software Download and Installation Configuration Portal Interface Settings 1 2. The login screen will appear.
mA" mPower™ PRO Quick Start Guide Configuration Portal via LAN with CPD fit Is not already Installed, download the Ubiquity Device Discovery Tool (v2.3) at app 1. Launch the Ubiquity Device Discovery Tool. 2 Functionalist devices on the network will appear. Locate the appropriate device (named PEU) under Product Name and double-click It. Note: i you have more than ane of the same device model, you can determine which one you are selecting by checking the Hardware (MAC) Address on the device label. 3.
mA" mPower™ PRO Quick Start Guide Software Download and Installation 5. Click Finish to confirm your settings. 6. Login screen will appear for the mFi Controller management Interface. Enter the Admin Name and Password that you created and slick Login. Accessing the Configuration Portal You need to connect to the Configuration Portal to ‘configure any of the following: + Cloud access + Access to local mFi Controller on a different IP network.
