User's Manual

3
Hardware Overview
Status LED The Status LED has two different states:
The Status LED will light
yellow when the mPower
is first powered on in
factory default mode out
of the box.
The Status LED will light
blue when the mPower
has been successfully
integrated into a network
and is working properly.
Reset Button The Reset button serves two functions:
• Restart Restarts the device when you press and release
it quickly.
• Restore Factory Defaults Press and hold until the LED
alternates colors and then remains steady yellow to
restore the device to the factory default settings.
Circuit Breaker Reset Button When excessive current
triggers the circuit breaker, the entire unit will be powered
off, including the LED. Press this button to reset the unit.
The LED will flash briefly and the unit will power back on.