mFi Power Strip Model: mPower
Introduction Introduction Thank you for purchasing the Ubiquiti mFi™ mPower™. The mPower is a power strip with Wi-Fi capability that is designed for use with the Ubiquiti mFi platform. Once connected, you can use the mFi Controller software to define rules using your web browser. Rules detail what actions occur when trigger conditions are met. Package Contents Wall Mount Slide mPower Mounting Plate Screws (Qty. 2) Anchors (Qty. 2) mFi Controller Software Quick Start Guide Version 1.
mFi™ mPower™ Power Strip Hardware Overview Status LED Reset Button 2 Circuit Breaker Reset Button
Hardware Overview Status LED The Status LED has two different states: The Status LED will light yellow when the mPower is first powered on in factory default mode out of the box. The Status LED will light blue when the mPower has been successfully integrated into a network and is working properly. Reset Button The Reset button serves two functions: • Restart Restarts the device when you press and release it quickly.
mFi™ mPower™ Power Strip Hardware Installation The mPower Power Strip includes an optional mounting plate. Wall-Mount 1. Position the Mounting Plate on the wall with the text in the proper orientation, and mark the mounting holes on the wall. Wall Mount Slide 2. Use a 6 mm drill bit to drill the holes. 3. Insert the anchors into the holes and use a Phillips screwdriver to secure Screws through the Mounting Plate into the Anchors.
Hardware Installation 4. Align the back of the mPower Power Strip with the Mounting Plate. Slide the Power Strip to the right to lock it into place.
mFi™ mPower™ Power Strip Software Installation Insert the mFi Controller software CD into your CD-ROM drive and follow the instructions for your specific computer type. Mac Users 1. Click the Install icon. 2. Click Continue and follow the on-screen instructions to install the software.
Software Installation 3. Go to Go > Applications and double-click the mFi icon. Proceed to Configuring the mFi Controller Software on page 9. PC Users 1. Launch mFi-installer.exe. 2. Click Install.
mFi™ mPower™ Power Strip 3. If your computer doesn’t have Java 1.6 or above installed, you will be prompted to install it. Click Install to continue. 4. Ensure the Start mFi Controller after installation option is checked and click Finish.
Software Installation Note: The mFi Controller software can also be launched from Start > All Programs. Configuring the mFi Controller Software 1. The mFi Controller software startup will begin. Click Launch a Browser to Manage the Network.
mFi™ mPower™ Power Strip 2. The mFi Configuration Wizard will appear the first time you launch the mFi Controller software. On the Welcome screen, select your language and country. Click Next. 3. Select the device(s) that you want to configure. The Refresh button can be used to refresh the list of devices. Click Next to continue.
Software Installation 4. Enter an administrator name in the Admin Name field. Enter a password in the Password and Confirm fields. Click Next. 5. Click Finish to confirm your settings.
mFi™ mPower™ Power Strip 6. A login screen will appear for the mFi Controller management interface. Enter the Admin Name and Password that you created and click Login. Configuring the mPower via Wi-Fi To configure the mPower device, you must access it via Wi‑Fi from a computer. The mPower device has a default SSID (wireless network name) labeled mFi followed by the last six characters of the MAC address. Windows 1. Go to Connect to Network. -- Windows 7 Right-click the Network icon.
Configuring the mPower via Wi-Fi Mac 1. Click the AirPort side of the screen). icon in the menu bar (top left 2. Select the wireless network (SSID) that begins with mFi. Once connected, the AirPort icon will change from gray to solid black. Accessing the Configuration Portal 1. Launch your web browser. Type config.mfi in the address field. Press enter (PC) or return (Mac). 2. The Configuration Portal will appear.
mFi™ mPower™ Power Strip 3. Enter your network information: a. Enter your Wi-Fi security credentials. The options that appear are based on the encryption method used on your Wi-Fi network. b. Enter the mFi Controller address. c. Enter the User Name. d. Enter the Password. e. Click Save Settings.
Configuring the mPower via Wi-Fi 4. A screen will appear with information about checking the device for connection status. Verify the Status LED is blue. It may take a few moments. 5. Reconnect to your existing wireless network by selecting the SSID from your wireless network utility. 6. The mPower device appears with the mPower icon in the left panel under the Drag on to Map heading. Once you’ve customized your map, you can position the mPower device in the appropriate location.
mFi™ mPower™ Power Strip Specifications mPower Dimensions Weight Mounting Power Outlets Memory Wi-Fi Standards LEDs Operating Temperature Humidity 16 9.5 x 4.375 x 1.625 mm 790 g Wall (Kit Included) 125VAC, 50~60 Hz , 15 Amps Per Outlet, 15 Amps Total 3 16 MB RAM, 8 MB Flash 802.11b/g/n 1 LED (Status) -10° to 45° C 95% RH Max.
General Warranty General Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) represents and warrants that the Products furnished hereunder shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS sole and exclusive obligation under the foregoing warranty shall be to repair or replace, at its option, any defective Product that fails during the warranty period.
mFi™ mPower™ Power Strip Warranty Conditions The foregoing warranty shall apply only if: (I) The Product has not been subjected to misuse, neglect or unusual physical, electrical or electromagnetic stress, or some other type of accident. (II) No modification, alteration or addition has been made to the Product by persons other than UBIQUITI NETWORKS or UBIQUITI NETWORK’S authorized representatives or otherwise approved by UBIQUITI NETWORKS.
Compliance Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.
mFi™ mPower™ Power Strip For MPE and antenna usage details, please visit our website at www.ubnt.com/compliance Industry Canada This Class B digital apparatus complies with Canadian ICES-003. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that permitted for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s).
Declaration of Conformity RF Exposure Warning The transceiver described here emits radio frequency energy. Although the power level is low, the concentrated energy from a directional antenna may pose a health hazard. Do not allow people to come closer than 20 cm to the antenna when the transmitter is operating. Additional information on RF exposure is available on the Internet at www.fcc.gov/oet/info/documents/bulletins L’émetteur-récepteur décrit ici émet de l’énergie de fréquence radio.
mFi™ mPower™ Power Strip Nederlands [Dutch] Hierbij verklaart UBIQUITI NETWORKS dat het toestel UBIQUITI NETWORKS device, in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze verklaart UBIQUITI NETWORKS dat deze UBIQUITI NETWORKS device, voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
Declaration of Conformity Italiano [Italian] Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar o UBIQUITI NETWORKS deklar , ka UBIQUITI NETWORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem.
mFi™ mPower™ Power Strip mFi Products Ubiquiti Networks offers a variety of products for the mFi platform. For additional details, visit www.ubnt.
Ubiquiti Networks Support Email: support@ubnt.com Phone (9 a.m. - 5 p.m. PST): 408-942-1153 Online Resources Wiki Page: wiki.ubnt.com Support Forum: forum.ubnt.com Downloads: downloads.ubnt.com www.ubnt.com © 2012 Ubiquiti Networks, Inc. All rights reserved.
