High-Performance airMAX™ Bridge Model: NBM3/NBM365/NBM900
Introduction Thank you for purchasing the Ubiquiti Networks™ NanoBridge™. This Quick Start Guide is designed to guide you through the installation and show you how to access the airOS™ Configuration Interface. This Quick Start Guide also includes the warranty terms and is for use with the NanoBridge, models NBM3, NBM365, and NBM900.
Hardware Overview NBM3/NBM365 Ports Secondary Main Reset Secondary Port This 10/100 Ethernet port is used for bridging. Main Port This 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the NanoBridge is already powered on.
NBM900 Ports RP-SMA LAN Reset RP-SMA Connector This connector can be used to connect an external antenna. LAN Port The 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the NanoBridge is already powered on.
NBM3/NBM365 LEDs LAN1 LAN2 Power The Power LED will light green when the device is connected to a power source. LAN1 Main The LAN1 Ethernet LED will light steady green when an active Ethernet connection is made to the Main Port and flash when there is activity. LAN2 Secondary The LAN2 Ethernet LED will light steady green when an active Ethernet connection is made to the Secondary Port and flash when there is activity.
NBM900 LEDs Power The Power LED will light green when the device is connected to a power source. Ethernet The Ethernet LED will light steady green when an active Ethernet connection is made and flash when there is activity. Signal In airOS, you can modify the wireless signal strength threshold values for each LED on the Advanced tab under Signal LED Thresholds. The default values are shown below: LED will light red when the wireless signal strength is above -94 dBm.
Installation Requirements • 10 mm wrench • 13 mm wrench • Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from the most brutal environments and devastating ESD attacks with industrial‑grade shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.
Installation The installation instructions show the NBM900; however, the same instructions apply to the NBM3 and NBM365. 1. Attach the Feed Support Tube to the Dish Bracket using the M8x50 Carriage Bolt, M8 Serrated Flange Nut, M6x15 Carriage Bolt, and M6 Serrated Flange Nut.
2. Attach the Dish Bracket to the Dish Reflector using the four M6x12 Carriage Bolts and four M6 Flange Nuts.
3. Attach the Mounting Bracket to the Dish Bracket using the four M8x15 Carriage Bolts and four M8 Flange Nuts. 10 10 4. Install the NanoBridge by lining up the mounting tabs of the NanoBridge with the slots on the Feed Support Tube. Then slide the NanoBridge into place.
5. Attach the Dish Assembly to the pole using the two U-Bolts, two Pole Clamps, and four M8 Flange Nuts. 10 10 Note: The mounting assembly can accommodate a Ø 1.25" - 2.25" pole. 6. Slide open the cover of the NanoBridge. Connect the Ethernet cable to the Ethernet port of the NanoBridge. Secure the Ethernet cable to the Feed Support Tube with the two Plastic Straps.
7. Connect the other end of the Ethernet cable from the NanoBridge to the Ethernet port labeled POE on the PoE Adapter. 8. Connect an Ethernet cable from your LAN or computer to the Ethernet port labeled LAN on the PoE Adapter. 9. Connect the Power Cord to the power port on the PoE Adapter. Connect the other end of the Power Cord to a power strip.
Accessing airOS Verify connectivity in the airOS Configuration Interface. 1. Make sure that your host machine is connected via Ethernet to the NanoBridge. 2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. 3. Launch your web browser and type https://192.168.1.20 in the address field. Press enter (PC) or return (Mac). 4. The login screen will appear. Enter ubnt in the Username and Password fields. Select your Country and Language.
Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer's responsibility to make sure the device is operated within local country regulatory requirements. Since Ubiquiti Networks equipment can be paired with a variety of antennas and cables, the Antenna (if applicable) and Output Power fields are provided to the professional installer to assist in meeting regulatory requirements.
Specifications NBM3/NBM365/NBM900 Dimensions NBM3/NBM365 NBM900 Weight NBM3/NBM365 NBM900 Operating Frequency NBM3 NBM365 NBM900 Gain NSM3/NSM365 NBM900 Networking Interface NBM3/NBM365 NBM900 Enclosure Max. Power Consumption NBM3/NBM365 NBM900 Power Supply Power Method Mounting Wind Survivability Wind Loading Operating Temperature Operating Humidity 492 x 440 x 705 mm 543 x 440 x 725 mm 0.9 kg (Radio) 5.088 kg (Dish and Mount Included) 1.310 kg (Radio) 5.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PUR
Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you.
Industry Canada This Class A digital apparatus complies with Canadian ICES-003. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2.
RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES. Dansk [Danish] Undertegnede UBIQUITI NETWORKS erklærer herved, at følgende udstyr UBIQUITI NETWORKS device, overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Italiano [Italian] Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar o UBIQUITI NETWORKS deklar , ka UBIQUITI NETWORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem.
