Specifications
12
Rocket
™
M3/M365 GPS
With airSync, the basestations make use of a common clock source
usingthebuilt-inGPSreceiver.Onedeviceisconfiguredasthe
synchronization master and the others are configured in Slave
Mode and provided with the MAC address of the Master.
Once this is done, the Master and Slave devices synchronize their
transmit and receive cycles so that they transmit at the same time
and receive at the same time. This resolves the interference issues.
Enabling Master/Slave Mode
1. Launch your web browser and login to the airOS interface (see
page 10 for login details).
2. Go to the Ubiquiti tab.
3. Select the appropriate mode: Master Mode should be selected
on your master device and Slave Mode should be selected on
all of your slave devices with the MAC address of the Master in
the Sync Master field.
4. Click Change to save your selection.