Carrier Class airMAX™ BaseStation
Introduction Introduction Thank you for purchasing a Rocket M3/M365 GPS series product. This Quick Start Guide is for use with the following models: Model Operating Frequency Rocket M3 GPS 3380 - 3720 MHz Rocket M365 GPS 3650 - 3675 MHz Package Contents Rocket M3 GPS or Rocket M365 GPS Metal Strap 24V PoE Adapter Power Cord Carrier Class airMAX™ BaseStation GPS Patch Antenna Quick Start Guide Installation Requirements • Antenna needs to have clear line of sight to the sky.
Rocket™ M3/M365 GPS Hardware Overview Connects to GPS Patch Antenna Connects to Sector Antenna Connects to Sector Antenna Removable Cover Ethernet Port 2
Hardware Overview LEDs Power The Power LED lights up steady green when the Rocket M3/M365 GPS is connected to a power source. Primary Ethernet The first Ethernet LED lights up steady green when an active Ethernet connection is made to the Primary Ethernet Port and flash when there is activity. GPS The GPS LED lights up green when the GPS signal strength can sustain airSync operation. This requires a minimum of 3 satellite connections.
Rocket™ M3/M365 GPS Adapter The Rocket M3/M365 GPS includes a pre-installed adapter for use on dish antenna installations. The adapter can remain on when connecting the Rocket M3/M365 GPS to a sector antenna. Removal for sector antenna installations is optional. To remove the pre-installed adapter from the Rocket M3/M365 GPS, lift up the latch and slide the adapter off. Connecting the Rocket M3/M365 GPS 1. Connect the RF cables to the connectors labeled Chain 0 and Chain 1 on the Rocket M3/M365 GPS.
Connecting the Rocket M3/M365 GPS 2. Slide the Rocket M3/M365 GPS on to the antenna mount with the pre‑installed adapter connected. Mounting on a Dish Antenna Mounting on a Sector Antenna 3. Attach the RF cables from the Rocket M3/M365 GPS to the connectors on the antenna.
Rocket™ M3/M365 GPS 4. Connect the GPS Patch Antenna to the center connector labeled GPS on the Rocket M3/M365 GPS. 5. Place the GPS Patch Antenna on the mounting hardware.
Connecting Power over Ethernet Sector Antenna Placement Connecting Power over Ethernet 1. Remove the port cover by lifting the release latch on the bottom of the Rocket M3/M365 GPS and sliding the cover off.
Rocket™ M3/M365 GPS 2. Connect an Ethernet cable to the Primary Ethernet Port and to the Ethernet port labeled POE on the PoE Adapter. 3. Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the PoE Adapter. 4. Connect the power cord to the power port on the PoE Adapter. Connect the other end of the power cord to a power outlet.
airOS Confirmation 5. Replace the port cover. airOS Confirmation Verify connectivity in the airOS interface. 1. Make sure that your host machine is connected via Ethernet to the Rocket M3/M365 GPS. 2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. 3. Launch your Web browser and type http://192.168.1.20 in the address field. Press enter (PC) or return (Mac).
Rocket™ M3/M365 GPS 4. The login screen will appear. Enter ubnt in the Username and Password fields. Select your Language. You must agree to the Terms of Use to use the product. Click Login. 5. On the Main tab you can verify the GPS Signal Quality. Click the GPS Details tab under Monitor to view the Satellite and Signal details. GPS Details tab The airOS Interface will appear allowing you to customize your settings as needed.
Installer Compliance Responsibility Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer's responsibility to make sure the device is operated within local country regulatory requirements. Since Ubiquiti Networks equipment can be paired with a variety of antennas and cables, the Antenna Gain, Cable Loss, and Output Power fields are provided to the professional installer to assist in meeting regulatory requirements.
Rocket™ M3/M365 GPS With airSync, the basestations make use of a common clock source using the built-in GPS receiver. One device is configured as the synchronization master and the others are configured in Slave Mode and provided with the MAC address of the Master. Once this is done, the Master and Slave devices synchronize their transmit and receive cycles so that they transmit at the same time and receive at the same time. This resolves the interference issues. Enabling Master/Slave Mode 1.
Specifications Specifications Rocket M3/M365 GPS Specifications Dimensions Weight Port RF Connectors Enclosure Max Power Consumption Power Supply Power Method Operating Temperature Operating Humidity Shock and Vibrations 16 x 8 x 3 cm 0.5 kg (1) 10/100 Ethernet Port (2) RPSMA and (1) SMA (Waterproof ) Outdoor UV Stabilized Plastic 8 Watts 24V, 1A PoE Supply Included Passive PoE (Pairs 4, 5+; 7,8 return) -30 to 75° C (-22 to 167° F) 5 to 95% Condensing ETSI300-019-1.
Rocket™ M3/M365 GPS Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
General Warranty General Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) represents and warrants that the Products furnished hereunder shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS sole and exclusive obligation under the foregoing warranty shall be to repair or replace, at its option, any defective Product that fails during the warranty period.
Rocket™ M3/M365 GPS Returns In the unlikely event a defect occurs, please work through the dealer or distributor from which this product was purchased. Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2.
Compliance CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. Alert sign! Follows CE marking Alert sign must be indicated if a restriction on use applied to the product and it must follow the CE marking. NB-Identification number (if there is any) Notified body number is indicated if it is involved in the conformity assessment procedure.
Rocket™ M3/M365 GPS Deutsch Die Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist , nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte.
Declaration of Conformity Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES. Dansk [Danish] Undertegnede UBIQUITI NETWORKS erklærer herved, at følgende udstyr UBIQUITI NETWORKS device, overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Rocket™ M3/M365 GPS Magyar [Hungarian] Alulírott, UBIQUITI NETWORKS nyilatkozom, hogy a UBIQUITI NETWORKS device, megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Íslenska [Icelandic] Hér me l sir UBIQUITI NETWORKS yfir ví a UBIQUITI NETWORKS device, er í samræmi vi grunnkröfur og a rar kröfur, sem ger ar eru í tilskipun 1999/5/EC.
Ubiquiti Networks Support Email: support@ubnt.com Phone (9 a.m. - 5 p.m. PST): 408-942-1153 Online Resources Wiki Page: www.ubnt.com/wiki Support Forum: www.ubnt.com/forum Downloads: www.ubnt.com/support/downloads www.ubnt.com © 2011 Ubiquiti Networks, Inc. All rights reserved.
