Setup guide

Page 2
Page 3
• Enable your network card: right-click on Local Area Connection and select Enable (if it’s
already enabled, the option would be “Disable” and just leave it as is).
• If there is a built in WIFI card, it should be disabled (right click and choose “Disable” if not
already so).
• Right click on Local Area Connection
and select Properties:
• If you do not need to share les or a printer on
your local network you should disable (un-tick)
“Client...” and “File and...”
for added security.
• WinXP: double click on Internet Protocol:
• Vista and Win7: double click on
Internet Protocol Version 4(TCP/IPv4):
• Click OK twice. There should be 2 LEDs lit on the Nanostation (power + network cable).
• Go to page 5.
• Fill in as pictured here:
We’re entering a static (xed) IP address
This will be your computer’s IP *
This is always so
This is the IP of the Nano
Nano IP here too
(The Nano will be acting
as a DNS server)
*
* Note: The last number can be any number
from 1 to 254 except 20 which is taken.